AEM – Scion xD ETI Cold Air Intake System Part # 41-1404

AEM-41-1404

AEM-41-1404

Buy Online @ JDMUltimate.com

As the successor to the Scion xA, the Scion xD had to be bigger and better than ever before. Not only did it need to have head-turning looks, it also had to deliver more power and keep up with the latest technology in audio equipment. To accomplish these tasks, Scion completely restyled the xD inside and out, gave it a bigger more-powerful engine, and even designed a lineup of tuner-friendly accessories for the five-door subcompact.

Straight from the factory, the redesigned xD comes standard with power windows, doors and mirrors. It’s given a choice of three premium audio systems made by Pioneer, all with six speakers and iPod interfaces. To top it off, the xD is powered by the 2ZR-FE dual overhead cam 1.8-liter engine that packs 128 horsepower and 125 lb/ft of torque.

As it sits from the factory, the xD is a step up from the previous xA model. For enthusiasts that desire to take the xD’s performance yet to another level, AEM is right there to help. Custom engineered for the 2008 and 2009 Scion xD, AEM has released a cold air intake system using the latest in ETI Technology (part number 41-1404). The 41-1404 air induction system features a one-piece mandrel bent aluminum inlet pipe coupled to an AEM DRYFLOW performance air filter to deliver the best combination of increased horsepower and reduced restriction. The cold air intake design routes the inlet pipe from the engine’s throttle body to an opening in the driver’s side wheel well for the best source of cool air inlet temperatures. In addition to the high-quality construction and fitment, AEM offers this xD air intake system in two finishes. The 41-1404P features a highly polished finish, while the 41-1404C has a deep gunmetal gray finish.

To maximize the horsepower gains of the xD’s 1.8-liter engine, AEM chose to utilize the newest in Electronically Tuned Intake (ETI) technology. By using an ETI system, the optimal intake tube diameter could be used for maximum airflow to the throttle body. AEM’s ETI intake systems are designed to electronically manipulate the vehicle’s MAF sensor readings. With the optimal inlet tube diameter combined with the preprogrammed ETI module (included), AEM extracted a maximum horsepower gain of 6.67 horsepower at 4,900 RPM. This increase in horsepower translated into a peak of 107 wheel horsepower with the 41-1404 intake system installed.

The 41-1404 Cold Air Intake System for the Scion xD uses a 21-201DK DRYFLOW Performance air filter. The 21-201DK has a 2.5-inch (63mm) inlet diameter and a height of 5.125-inches (130mm) allowing abundant airflow into the 2ZR-FE engine. The oil-free DRYFLOW technology is extremely durable and easy to clean. To further augment the filtration properties of the DRYFLOW performance filterAEM also offers DRYFLOW Pre-Filters (Part number 1-4000 for the 41-1404 series of intakes). Designed to prevent splashes of water and/or mud from saturating the air filter, AEM Pre-filters are manufactured from durable micro-screen materials that are pretreated with a proprietary hydrophobic process. In addition, the AEM DRYFLOW Pre-filters also extend the service life of the air filter but add very little restriction to the airflow.

Buy Online @ JdmUltimate

AEM New Release – Scion tC ETI Intake System

AEM-41-1401C-Scion tC ETI Intake System

AEM-41-1401C-Scion tC ETI Intake System

Buy Online @ JDMUltimate.com

The stylish Scion tC has been attracting the attention of drivers since its introduction in 2005. Any driver looking for a compact car with good fuel mileage and stylish interior that is packed with an abundance of features should look into the Scion tC. The newer models from 2008 to 2010 have brought some needed improvements in the exterior and interior design. The addition of the iPod interface was also a nice touch. Although the Scion tC is a great buy for your money, the 2.4 liter four-cylinder engine is not very powerful.

To increase the power and performance in your 2008, 2009 or 2010 Scion tC, AEM Induction Systems has released a cold air intake system (41-1401C) that will fit the tight engine compartment of your vehicle.  The 41-1401C is not a typical cold air intake.  It was designed with AEM’s Electronically Tuned Intake (ETI) technology.

This cold air intake incorporates AEM’s ETI module which electronically adjusts the tC’s MAF sensor to properly read air density.  The result is an intake system that works with factory electronics and provides large horsepower and torque gains.  The 41-1401C completely replaces the Scion tC’s restrictive factory intake system with a gunmetal gray aluminum cold air intake.  This cold air intake connects at the engine throttle body and places the air filter at the driver side wheel well.  This ensures the delivery of cooler outside air to the engine.

The 41-1401C uses a DryFlow air filter, part 21-200DK. AEM’s oil-free DRYFLOW air filter is extremely durable and easy to clean.

Designed, tuned and dyno-tested to fit the 2008, 2009 and 2010 Scion tC, tests show the 41-1401C has an increase of 9 horsepower at 6400 rpm.  Installation is relatively simple and is accomplished using basic tools.  All AEM air intakes come with a limited lifetime warranty.

Buy Online @ JdmUltimate